VÄDERSTAD RAPID A 400-800™

One of the unique features of the Rapid disc seed coulter is its cultivating ability, adding further intensity to the soil preparation of the front tools. More soil preparation during drilling means less passes needed for preparation. Less passes ahead saves ground moisture and retains soil structure, maximizes the plant potential.

To gain full control, it is very important that the seed drill does not alter from its straight track behind the tractor. Something that is further essential in hilly conditions. Because of the x-disc setup of the front tool, Rapid will always travel in a straight line behind the tractor. The Väderstad X-Disc is crucial to reach the full potential of a GPS- or RTK-system on the tractor.

Rapid is designed to never let factors such as shifting field conditions or high working speeds affect the seed depth. This is achieved by putting a very high pressure, from 150kg on the seed coulters, while also controlling the depth by connecting two seed coulters to one packer wheel. As a result, Rapid is able to create an even emergence at all times.

No matter if the soil is heavy, medium or light, the large offset mounted packer wheels will always stay on the field surface and deliver the correct seed depth. This makes Rapid the ideal choice when your soil conditions vary and you need a seed drill to rely on. By easily setting the working depth as well as seed and fertilization rate from the cab, Rapid allows for a versatile precision farming, adapted according to your local soil conditions.

Increasing access to information is the cornerstone of smarter farming. Since SeedEye registers each individual seed and fertiliser passing through the tubes, the seeding is visualized in real time. If a deviation should occur, SeedEye gives an immediate warning so that any impact on the drilling can be quickly remedied.

Väderstad SeedEye puts the control in your hands giving you the opportunity to fully optimize the result on the field. By measuring seeds per square meter, instead of weight per hectare, the seeding result is no longer affected by variations in different seed bags or seed types. This increases precision and maximizes seeding performance. Working with ISOBUS Task Controller, a variable seed rate and sectional shut off is also possible.

The pneumatic seed drill Rapid A 400-800 S is a powerful drill ready for future farming. Rapid A 400-800S is designed with the driver in focus, while never compromising on the important seeding precision and crop quality. The three seed drills in the product family are seed-only versions equipped with a high precision metering system.

Exact seed metering
At the base of the seed hopper, the seed enters the hydraulic metering system and is distributed pneumatically to the distribution heads. The metering system Fenix can handle seed rates from 1.5kg/ha up to 500kg/ha without any parts having to be changed. Thanks to the hydraulic drive, high seed rates can be metered without lowering the driving speed. The integrated fan runs at low speed, resulting in low fuel consumption and quiet operation. Its high location reduces the amount of dust and crop residues that get in, increasing drilling accuracy.

Depth setting from the cab
To be able to instantly adapt to varying soil types or differing conditions in the field, Rapid A 400-800S can be equipped with the unique depth control system Interactive Depth Control (IDC). The system enables fine-tuning of the seeding depth with 1mm accuracy on the move. Combined with the ability to alter the seed rate, the driver is constantly in full control of the seeding operation.

The seed drills in the product family Rapid A 600-800 C/J have pneumatic seed transport with a very high drilling capacity. Rapid A 600-800 C/J combine an impressive capacity with easy maneuverability and great results. The machine is available either as the combi-version Rapid A 600-800 C, or as the seed-only version Rapid A 600-800 J. All models have an extensive hopper capacity of 6000 litres.

Designed for high output rates
The high capacity hydraulically driven metering system Fenix is able to handle all seed sizes in application rates from 1.5kg/ha up to 500kg/ha, without having to change any parts. This means that the metering system will never be a limiting factor for high rates and high speed drilling on the field.

Adjust seeding depth on the move
To be able to instantly adapt to varying soil structure or differing conditions in the field, Rapid A 600-800C/J can be equipped with the unique depth control system Interactive Depth Control (IDC). The system enables fine-tuning of the seeding depth with 1mm accuracy on the move. Combined with the ability to alter the seed rate, the driver is constantly in full control of the seeding operation.